AMALFI INGREDIENTS
MATERIAL SAFETY DATA SHEET

Section I. Identity
Product Name: AMALFI Propyl Gallate
Manufacturer: AMALFI INGREDIENTS
Manufacturer’s Address: 94 E. Jefryn Blvd,Unit H, Deer Park, NY 11729
Manufacturer’s Phone #: 631-392-1526
Chemtrec Phone #: 800-424-9300
Date Prepared: JUNE 2006

Section II. Hazardous Ingredients/Identity Information
Hazardous Components (Specific Chemical  Identity: Common Name (s)) Other limits recommended %
OSHA PEL ACGIH Threshold Limit Value (units)
Components:
n-Propyl Gallate    CAS # 121-79-9

Section III. Physical/Chemical Characteristics
Boiling Point: Decomposes
Vapor Pressure (mm Hg.): N/A
Vapor Density (AIR=1): N/A
Solubility in Water: 0.35%
Specific Gravity (H2O=1): 1.2
Melting Point: 146-148o C
Evaporation Rate (Butil Acetate=1): N/A
Appearance & Odor: White to tan crystalline powder, slightly aromatic 

Section IV. Fire & Explosion Hazard Data
Flash Point: 187o Closed Cup
Flammable Limits: N/A
Extinguishing Media: Water fog, foam, dry chemical or CO2
LEL: N/A
UEL: N/A
Special Fire Fighting Procedures: N/A
Unusual Fire & Explosion Hazards: N/A 

Section V. Health Hazard Data
OSHA Regulate:
Carcinogen – NTP Program: N/A
Carcinogen – IARC Program: N/A
Health Hazards (Acute Chronic): N/A
Signs & Symptoms of Exposure: May cause an allergic skin reaction 
Medical Conditions Aggravated by Exposure: N/A
Routes of Entry: Inhalation - no, skin - no, ingestion - possible
Emergency First Aid: Wash skin with soap and water.  If in eyes, flush with water.

Section VI. Reactivity Data
Stability: Stable
Conditions to Avoid: N/A
Incompatibility (Materials to Avoid): Strong oxidizing agents
Hazardous Decomposition or Byproducts: CO or CO2
Hazardous Polymerization: Will not occur

Section VII. Precautions for Safe Handling and Use:
Steps to Be Taken in Case Materials are Released or Spilled: Sweep, shovel or vacuum into appropriate containers.
Waste Disposal Method: In accordance with Local or State regulations.
Precautions to Be Taken in Handling and Storing: Keep in cool or well ventilated area away from flame or fire.
Other Precautions: N/A

Section VIII. Control Measures
Eye Protection: Recommended
Local Exhaust: N/A
Respiratory Protection: N/A
Other Protective Clothing or Equipment: N/A
Protective Gloves: N/A
Ventilation: Recommended
Work/Hygienic Practices: N/A

DISCLAIMER:
The information in this MSDS was obtained from current and reliable sources. However , the data is provided without any warranty , expressed or implied, regarding its correctness or accuracy. Since the conditions of handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume full responsibility for loss, injury and expense arising out of product’s improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage use or disposal of this product which may not be covered in this MSDS. The user is responsible for full compliance.