MATERIAL SAFETY DATA SHEET Section I. Identity Product Name: AMALFI ETHOXYQUIN Manufacturer: AMALFI INGREDIENTS Manufacturer’s Address: 94 E. Jefryn Blvd,Unit H, Deer Park, NY 11729 Manufacturer’s Phone #: 631-392-1526 Chemtrec Phone #: 800-424-9300 Date Prepared: JUNE 2006 Section II. Hazardous Ingredients/Identity Information Hazardous Components (Specific Chemical Identity: Common Name (s)) Other limits recommended % OSHA PEL ACGIH Threshold Limit Value (units) Components: Ethoxyquin Feed Preservatives CAS # 91-53-2 N/A N/A Section III. Physical/Chemical Characteristics Boiling Point: 125o C Vapor Pressure (mm Hg.): 2.6 x 10-4 Vapor Density (AIR=1): N/A Solubility in Water: 75 ppm Specific Gravity (H2O=1): 1.03 Melting Point: N/A Evaporation Rate (Butil Acetate=1): N/A Appearance & Odor: Brownish red liquid Section IV. Fire & Explosion Hazard Data Flash Point: 143o C open cup Flammable Limits: N/A Extinguishing Media: Water, foam, dry chemical, carbon dioxide, or any Class B agents LEL: N/A UEL: N/A Special Fire Fighting Procedures: Full protective clothing and self-contained breathing apparatus. Unusual Fire & Explosion Hazards: None Section V. Health Hazard Data OSHA Regulate: 6-ethoxy1;2,dihydro 224 trimethylquinoline CAS #91.53.2 Carcinogen – NTP Program: N/A Carcinogen – IARC Program: N/A Health Hazards (Acute Chronic): Avoid contact with eyes, skin, and clothing. Wash thoroughly after handling. Signs & Symptoms of Exposure: Possible allergic reactions. Medical Conditions Aggravated by Exposure: Asthma, Eczema Routes of Entry: Inhalation - yes, skin - yes, ingestion - yes Emergency First Aid: Wash off with soap and water. See physician if irritation develops. Section VI. Reactivity Data Stability: Stable Conditions to Avoid: Contact with acids and very low temperatures Incompatibility (Materials to Avoid): Acids and Alkalies Hazardous Decomposition or Byproducts: Hazardous Polymerization: Will not occur Section VII. Precautions for Safe Handling and Use: Steps to Be Taken in Case Materials are Released or Spilled: Use clay or other non-combustible absorbent. Place in plastic lined drum. Waste Disposal Method: In an approved landfill in compliance with all Federal, State, and local regulations. Precautions to Be Taken in Handling and Storing: Ethoxyquin Feed Preservative doesn't cause significant eye irritation or toxicity requiring special protection. Use good industrial practice to avoid eye contact. Wear appropriate protective clothing and chemical resistant gloves to prevent skin contact. Consult glove manufacturer to determine appropriate type glove for given application. Wear face shield and chemical resistant clothing such as rubber apron when splashing is likely. Wash contaminated skin promptly. Launder contaminated clothing and clean protective equipment before reuse. Wash thoroughly after handling. Other Precautions: Section VIII. Control Measures Eye Protection: Recommended Local Exhaust: Recommended Respiratory Protection: Not essential Other Protective Clothing or Equipment: Rubber apron Protective Gloves: Recommended Ventilation: Work/Hygienic Practices: DISCLAIMER: The information in this MSDS was obtained from current and reliable sources. However , the data is provided without any warranty , expressed or implied, regarding its correctness or accuracy. Since the conditions of handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume full responsibility for loss, injury and expense arising out of product’s improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage use or disposal of this product which may not be covered in this MSDS. The user is responsible for full compliance. |