MATERIAL SAFETY DATA SHEET Section I. Identity Product Name: AMALFI EPC75 Manufacturer: AMALFI INGREDIENTS Manufacturer’s Address: 94 E. Jefryn Blvd,Unit H, Deer Park, NY 11729 Manufacturer’s Phone #: 631-392-1526 Chemtrec Phone #: 800-424-9300 Date Prepared: JUNE 2006 Section II. Hazardous Ingredients/Identity Information Hazardous Components (Specific Chemical Identity: Common Name (s)) Other limits recommended % OSHA PEL ACGIH Threshold Limit Value (units) Components: Ethoxyquin CAS # 91-53-2 Propylene Glycol CAS # 57-55-6 Citric Acid CAS # 77-92-9 Section III. Physical/Chemical Characteristics Boiling Point: ~ 150o C Vapor Pressure (mm Hg.): ~ 2.6 x 10-4 Vapor Density (AIR=1): N/A Solubility in Water: ~ 25% soluble in water Specific Gravity (H2O=1): 1.05 Melting Point: N/A Evaporation Rate (Butil Acetate=1): No Data Appearance & Odor: Reddish Brown Liquid with slight odor Section IV. Fire & Explosion Hazard Data Flash Point: ~135o C (COC) Flammable Limits: N/A Extinguishing Media: Water, dry chemical, CO2, foam or any class B agent LEL: N/A UEL: N/A Special Fire Fighting Procedures: Full protective clothing and self contained breathing apparatus Unusual Fire & Explosion Hazards: Section V. Health Hazard Data OSHA Regulate: Carcinogen – NTP Program: Carcinogen – IARC Program: Health Hazards (Acute Chronic): Nausea or Dizziness Signs & Symptoms of Exposure: Skin discoloration. Possible allergic reactions. Medical Conditions Aggravated by Exposure: Asthma, Eczema, Psoriasis, Sores, Decubitis. Routes of Entry: Inhalation - yes, skin - yes, ingestion - yes Emergency First Aid: Wash off with soap & water. Consult with Physician if any irritation develops. If in eyes, flush with copious amounts of water for 10 minutes. Section VI. Reactivity Data Stability: Stable Conditions to Avoid: Oxidizing or reducing agent Incompatibility (Materials to Avoid): Contact with strong acids or alkalies Hazardous Decomposition or Byproducts: Carbon Dioxide and Monoxide Hazardous Polymerization: Will not occur Section VII. Precautions for Safe Handling and Use: Steps to Be Taken in Case Materials are Released or Spilled: Absorb with vermiculite, sand or any non-combustible absorbent, sweep or vacuum up (Ventilate area if required). Clean with soap (detergent) in any slippery surfaces remain. Waste Disposal Method: Normal in compliance with any State, and Local ordinances. Precautions to Be Taken in Handling and Storing: Keep containers closed away from high heat or flame. Other Precautions: Section VIII. Control Measures Eye Protection: Recommended Local Exhaust: Recommended Respiratory Protection: Other Protective Clothing or Equipment: Aprons Protective Gloves: Recommended Ventilation: N/A Work/Hygienic Practices: Wash thoroughly after handling DISCLAIMER: The information in this MSDS was obtained from current and reliable sources. However , the data is provided without any warranty , expressed or implied, regarding its correctness or accuracy. Since the conditions of handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume full responsibility for loss, injury and expense arising out of product’s improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage use or disposal of this product which may not be covered in this MSDS. The user is responsible for full compliance. |