MATERIAL SAFETY DATA SHEET Section I. Identity Product Name: AMALFI A Food Grade Antioxidant Manufacturer: AMALFI INGREDIENTS Manufacturer’s Address: 94 E. Jefryn Blvd,Unit H, Deer Park, NY 11729 Manufacturer’s Phone #: 631-392-1526 Chemtrec Phone #: 800-424-9300 Date Prepared: JUNE 2006 Section II. Hazardous Ingredients/Identity Information Hazardous Components (Specific Chemical Identity: Common Name (s)) Other limits recommended % OSHA PEL ACGIH Threshold Limit Value (units) Components: Propylene Glycol CAS # 57-55-6 not established Butylated Hydroxyanisole CAS # 25013-16-5 not established Citric Acid CAS # 77-92-9 not established Section III. Physical/Chemical Characteristics Boiling Point: 198o C (388o F) Vapor Pressure (mm Hg.): N/A Vapor Density (AIR=1): N/A Solubility in Water: Appreciable Specific Gravity (H2O=1): 1.071 @ 20o C (68o F) Melting Point: N/A Evaporation Rate (Butil Acetate=1): Negligible Appearance & Odor: Light yellow viscous liquid with slight odor Section IV. Fire & Explosion Hazard Data Flash Point: 108o C (227o F) CC Flammable Limits: N/A Extinguishing Media: Water spray, Dry chemical, Carbon Dioxide (CO2), Alcohol foam LEL: N/A UEL: N/A Special Fire Fighting Procedures: Wear self contained breathing apparatus and protective clothing Unusual Fire & Explosion Hazards: None Section V. Health Hazard Data OSHA Regulate: Carcinogen – NTP Program Carcinogen – IARC Program: BHA - Possible human carcinogen (Group 2B) Health Hazards (Acute Chronic): May cause skin, eye and respiratory tract irritation. Signs & Symptoms of Exposure: Medical Conditions Aggravated by Exposure: Routes of Entry: Inhalation - yes, skin - possible, ingestion - possible. Emergency First Aid: Inhalation: In case of irritation from exposure, move victim to fresh air. Treat symptomatically. Get medical attention if symptoms persist.. Eyes: Immediately flush with plenty of water for at least 15 minutes. If easy to do, remove contact lenses. Get medical attention. Skin: Wash with soap and water. Remove contaminated clothing and shoes. Get medical attention if symptoms persist. Wash contaminated clothing before reuse. Destroy or thoroughly clean contaminated shoes. Ingestion: Seek medical advice. Section VI. Reactivity Data Stability: Stable Conditions to Avoid: Incompatibility (Materials to Avoid): Material can react with strong oxidizing agents Hazardous Decomposition or Byproducts: carbon dioxide, carbon monoxide Hazardous Polymerization: Will not occur Section VII. Precautions for Safe Handling and Use: Steps to Be Taken in Case Materials are Released or Spilled: Absorb spill with vermiculite or other inert material, then place in container for chemical waste. For large spills flush area with water spray. Prevent run off from entering drains, sewers, or streams. Waste Disposal Method: Discharge. treatment or disposal may be subject to national, state, or local laws. Incinerate. Precautions to Be Taken in Handling and Storing: Avoid contact with eyes, skin, and clothing. Avoid breathing vapor from heated material. Use only with adequate ventilation. Wash thoroughly after handling. Keep container closed. This material may be used in food. Protect from contamination. Do not store or ship together with odorous substances, toxic substances. Other Precautions: Keep from contact with oxidizing materials. Section VIII. Control Measures Eye Protection: Safety glasses or goggles and face shield Local Exhaust: Recommended Respiratory Protection: An approved respirator if mist or vapor occur Other Protective Clothing or Equipment: Wear protective clothing and boots appropriate for the risk of exposure. Protective Gloves: Chemical-Resistant gloves Ventilation: Recommended Work/Hygienic Practices: Eye bath, washing facilities. DISCLAIMER: The information in this MSDS was obtained from current and reliable sources. However , the data is provided without any warranty , expressed or implied, regarding its correctness or accuracy. Since the conditions of handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume full responsibility for loss, injury and expense arising out of product’s improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage use or disposal of this product which may not be covered in this MSDS. The user is responsible for full compliance. |