MATERIAL SAFETY DATA SHEET Section I. Identity Product Name: AMALFI 50AD (Dry) Manufacturer: AMALFI INGREDIENTS Manufacturer’s Address: 94 E. Jefryn Blvd,Unit H, Deer Park, NY 11729 Manufacturer’s Phone #: 631-392-1526 Chemtrec Phone #: 800-424-9300 Date Prepared:JUNE 2006 Section II. Hazardous Ingredients/Identity Information Hazardous Components (Specific Chemical Identity: Common Name (s)) Other limits recommended % OSHA PEL ACGIH Threshold Limit Value (units) Components: Mixed Tocopherols Silica Citric Acid CAS # 77-92-9 Vegetable Oil Rosemary Extract Section III. Physical/Chemical Characteristics Boiling Point: N/A Vapor Pressure (mm Hg.): N/A Vapor Density (AIR=1): N/A Solubility in Water: Slightly soluble pH 10% solution ~2.5 Specific Gravity (H2O=1): 30-40 lbs/cu ft Melting Point: N/A Evaporation Rate (Butil Acetate=1): N/A Appearance & Odor: Off-white powder with herbal odor Section IV. Fire & Explosion Hazard Data Flash Point: Flammable Limits: Extinguishing Media: None LEL: N/A UEL: N/A Special Fire Fighting Procedures: None Unusual Fire & Explosion Hazards: None Section V. Health Hazard Data OSHA Regulate: No Carcinogen – NTP Program: No Carcinogen – IARC Program: No Health Hazards (Acute Chronic): Pulmonary Disorders Signs & Symptoms of Exposure: Sneezing, Coughing, Itching, Rashes Medical Conditions Aggravated by Exposure: Bronchitis, Asthma, Allergies, Runny nose Routes of Entry: Inhalation - yes, skin - no, ingestion - yes Emergency First Aid: Remove person from further exposure. Wash with soap & water. If in eyes, flush with copious amounts of water. Section VI. Reactivity Data Stability: Stable Conditions to Avoid: Incompatibility (Materials to Avoid): Strong oxidizers or reducing agents Hazardous Decomposition or Byproducts: None Hazardous Polymerization: Will not occur Section VII. Precautions for Safe Handling and Use: Steps to Be Taken in Case Materials are Released or Spilled: Sweep or vacuum up place in appropriate containers for disposal. Waste Disposal Method: Normal in accordance with state & local regulations. Precautions to Be Taken in Handling and Storing: Avoid contact with high heat or humidity. Other Precautions: Avoid prolonged or unnecessary exposure. Section VIII. Control Measures Eye Protection: Recommended Local Exhaust: Recommended Respiratory Protection: NIOSH approved Other Protective Clothing or Equipment: Protective Gloves: Recommended Ventilation: Work/Hygienic Practices: Wash with soap & water after handling. DISCLAIMER: The information in this MSDS was obtained from current and reliable sources. However , the data is provided without any warranty , expressed or implied, regarding its correctness or accuracy. Since the conditions of handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume full responsibility for loss, injury and expense arising out of product’s improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage use or disposal of this product which may not be covered in this MSDS. The user is responsible for full compliance. |