MATERIAL SAFETY DATA SHEET Section I. Identity Product Name: AMALFI 28 Manufacturer: AMALFI INGREDIENTS Manufacturer’s Address: 94 E. Jefryn Blvd,Unit H, Deer Park, NY 11729 Manufacturer’s Phone #: 631-392-1526 Chemtrec Phone #: 800-424-9300 Date Prepared: JUNE 2006 Section II. Hazardous Ingredients/Identity Information Hazardous Components (Specific Chemical Identity: Common Name (s)) Other limits recommended % OSHA PEL ACGIH Threshold Limit Value (units) Components: Propylene Glycol CAS #57-55-6 TBHQ CAS #1948-33-0 Section III. Physical/Chemical Characteristics Boiling Point: ~ 340o F Vapor Pressure (mm Hg.): N/A Vapor Density (AIR=1): N/A Specific Gravity (H2O=1): ~1.08 Melting Point: N/A Evaporation Rate (Butil Acetate=1): Negligible Solubility in Water: Appreciable (some precipitation of TBHQ) Appearance & Odor: Light yellow liquid with sweet odor Section IV. Fire & Explosion Hazard Data Flash Point: Est. 230o F Closed Cup Flammable Limits: N/A Extinguishing Media: Water spray, dry chemical, CO2, foam LEL: N/A UEL: N/A Special Fire Fighting Procedures: Wear self contained breathing apparatus Unusual Fire & Explosion Hazards: Generation of Carbon Monoxide and Nitrogen Oxides Section V. Health Hazard Data OSHA Regulate: Carcinogen – NTP Program: N/A Carcinogen – IARC Program: N/A Health Hazards (Acute Chronic): Irritation of gastrointestinal tract, eye irritation, skin irritation. Signs & Symptoms of Exposure: Rash, irritation. allergic reaction, dizziness, nausea, headache. Medical Conditions Aggravated by Exposure: Allergies, Psoriases, Acne, Conjunctivitis Routes of Entry: Inhalation - Possible, skin - Yes, ingestion - Yes Emergency First Aid: Remove victim from area to fresh air or apply oxygen. If in eyes wash with copious amounts of water. Section VI. Reactivity Data Stability: Stable Conditions to Avoid: Incompatibility (Materials to Avoid): Oxidizing agents Hazardous Decomposition or Byproducts: Hazardous Polymerization: Will not occur Section VII. Precautions for Safe Handling and Use: Steps to Be Taken in Case Materials are Released or Spilled: Vacuum up with wet vacuum. Absorb with Vermiculite, Kitty Litter, Sand etc. Sweep up. Wash area with soap and water. Waste Disposal Method: Normal in accordance with state or local regulations. May be incinerated. Precautions to Be Taken in Handling and Storing: Keep away from flame and high heat. Keep from contact with oxidizing materials. Other Precautions: Section VIII. Control Measures Eye Protection: Recommended Local Exhaust: Recommended Respiratory Protection: Recommended Other Protective Clothing or Equipment: Apron or Coveralls Protective Gloves: Recommended Ventilation: Work/Hygienic Practices: Wash with soap and water before eating or using toilet facilities. DISCLAIMER: The information in this MSDS was obtained from current and reliable sources. However , the data is provided without any warranty , expressed or implied, regarding its correctness or accuracy. Since the conditions of handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume full responsibility for loss, injury and expense arising out of product’s improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage use or disposal of this product which may not be covered in this MSDS. The user is responsible for full compliance. |