AMALFI INGREDIENTS
MATERIAL SAFETY DATA SHEET

Section I. Identity
Product Name: AMALFI 10A
Manufacturer: AMALFI INGREDIENTS
Manufacturer’s Address: 94 E. Jefryn Blvd,Unit H, Deer Park, NY 11729
Manufacturer’s Phone #: 631-392-1526
Chemtrec Phone #: 800-424-9300
Date Prepared: JUNE 2006

Section II. Hazardous Ingredients/Identity Information
Hazardous Components (Specific Chemical  Identity: Common Name (s)) Other limits recommended %
OSHA PEL ACGIH Threshold Limit Value (units)
Components:
Citric Acid                    CAS #77-92-9
Vegetable Oil               CAS #8001-29-4
BHA                            CAS #25013-16-5
BHT                            CAS #128-37-0
Glyceryl Mono Oleate   CAS #25496-72-4

Section III. Physical/Chemical Characteristics
Boiling Point: N/A
Vapor Pressure (mm Hg.): N/A
Vapor Density (AIR=1): N/A
Solubility in Water: Insoluble
Specific Gravity (H2O=1): 0.935-0.945
Melting Point: N/A
Evaporation Rate (Butil Acetate=1): N/A
Appearance & Odor: Beige color with bland oil odor

Section IV. Fire & Explosion Hazard Data
Flash Point: N/A
Flammable Limits: N/A
Extinguishing Media: Foam; CO2; dry chemical
LEL: N/A
UEL: N/A
Special Fire Fighting Procedures: Do not use water.
Unusual Fire & Explosion Hazards: CO and NOx

Section V. Health Hazard Data
OSHA Regulate:
Carcinogen – NTP Program: N/A
Carcinogen – IARC Program: N/A
Health Hazards (Acute Chronic): N/A
Signs & Symptoms of Exposure: N/A
Medical Conditions Aggravated by Exposure:
Routes of Entry: Inhalation - no, skin - yes, ingestion - yes
Emergency First Aid:

Section VI. Reactivity Data
Stability: Stable
Conditions to Avoid: N/A
Incompatibility (Materials to Avoid): N/A
Hazardous Decomposition or Byproducts:
Hazardous Polymerization: Will not occur

Section VII. Precautions for Safe Handling and Use:
Steps to Be Taken in Case Materials are Released or Spilled: Use vermiculite or similar absorbent. Vacuum or sweep up place in bags or drums. Wash area down with soap and water in case a film remains.
Waste Disposal Method: Normal, in accordance with local regulations.
Precautions to Be Taken in Handling and Storing: Store away from open flame or high heat. Keep away from toxic chemicals
Other Precautions:

Section VIII. Control Measures
Eye Protection: Recommended
Local Exhaust: 
Respiratory Protection: N/A
Other Protective Clothing or Equipment: Aprons
Protective Gloves: Recommended
Ventilation: N/A
Work/Hygienic Practices: 

DISCLAIMER:
The information in this MSDS was obtained from current and reliable sources. However , the data is provided without any warranty , expressed or implied, regarding its correctness or accuracy. Since the conditions of handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume full responsibility for loss, injury and expense arising out of product’s improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage use or disposal of this product which may not be covered in this MSDS. The user is responsible for full compliance.